This video explains how to upgrade your PS4′s hard drive to an SSD in just a few easy steps…
Basically, the PS4 hard drive upgrade process is very simple. You need to slide off the shiny section of the PS4′s case, remove a single screw (denoted by the X, Y, O, triangle symbols), and then pull the hard drive. After that you remove it from the drive caddy, drop in your new hard drive or SSD with that same caddy, and put everything back in place. You’ll want to pay special attention to restoring the panel on the case, as it slides in from the top, not fully from the side (the video makes everything quite clear).
With the hardware in order, you’ll want to head over to Playstation.com and get the version 1.5 PlayStation 4 Software Update. This can then be installed on your PS4 using a FAT 32-formatted USB drive (1GB or larger), which will put Sony’s operating system on the blank drive.
After that point you’ll need to start fresh with your PS4 — connect to wireless again, add your PSN account, redownload your games, etc., but everything should go by very quickly since you’ll be rocking that speedy new SSD.
Source: GEEK
0 comments:
Post a Comment